1 sy100s364 micrel, inc. m9999-042307 hbwhelp@micrel.com or (408) 955-1690 16-input multiplexer sy100s364 max. propagation delay of 1300ps i ee min. of ?3ma industry standard 100k ecl levels extended supply voltage option: v ee = ?.2v to ?.5v voltage and temperature compensation for improved noise immunity internal 75k ? input pull-down resistors 70% faster than fairchild 40% lower power than fairchild function and pinout compatible with fairchild f100k available in 28-pin plcc packages description the sy100s364 is a 16-input multiplexer designed for use in high-performance ecl systems. the four data select inputs (s 0 , s 1 , s 2 , s 3 ) determine the bit from the 16 inputs (i n ) that will be passed on to the output as shown in the truth table. the output data polarity is the same as the input. the inputs on the device have 75k ? pull-down resistors. features rev.: i amendment: /0 issue date: april 2007 i 15 s 3 i 7 i 14 i 13 i 12 i 11 i 10 i 9 i 8 s 2 i 5 i 6 s 1 i 3 i 4 s 0 i 1 i 2 i 0 z block diagram
2 sy100s364 micrel, inc. m9999-042307 hbwhelp@micrel.com or (408) 955-1690 package/ordering information 28-pin plcc (j28-1) ordering information package operating package lead part number type range marking finish sy100s364jc j28-1 commercial sy100s364jc sn-pb sy100s364jctr (1) j28-1 commercial sy100s364jc sn-pb sy100s364jz (2) j28-1 commercial sy100s364jz with matte-sn pb-free bar-line indicator sy100s364jztr (1, 2) j28-1 commercial sy100s364jz with matte-sn pb-free bar-line indicator notes: 1. tape and reel. 2. pb-free package is recommended for new designs. i 8 z v cca v cc i 7 v cc i 15 v ee s 1 s 0 s 2 v ees 4 3 2 1 28 27 12 13 14 15 16 17 19 11 20 10 21 9 22 8 23 7 24 6 top view plcc j28-1 i 6 s 3 26 18 25 5 i 14 i 13 i 12 v ees i 11 i 10 i 9 i 2 v ees i 1 i 3 i 0 i 4 i 5 select inputs output s 0 s 1 s 2 s 3 z l lll i 0 h lll i 1 lhll i 2 hhll i 3 llhl i 4 hlhl i 5 lhhl i 6 hhhl i 7 lllh i 8 hllh i 9 lhlhi 10 hhlh i 11 llhhi 12 hlhhi 13 l hhh i 14 h hhh i 15 note: 1. h = high voltage level l = low voltage level truth table (1) pin function i 0 ?i 15 data inputs s 0 ?s 3 select inputs z data output v ees v ee substrate v cca v cco for ecl outputs pin names
3 sy100s364 micrel, inc. m9999-042307 hbwhelp@micrel.com or (408) 955-1690 dc electrical characteristics v ee = ?.2v to ?.5v unless otherwise specified; v cc = v cca = gnd symbol parameter min. typ. max. unit condition i ih input high current av in = v ih (max.) i n 200 s 0 , s 1 200 s 2 , s 3 200 i ee power supply current ?3 ?5 ?0 ma inputs open t a = 0 ct a = +25 ct a = +85 c symbol parameter min. max. min. max. min. max. unit condition t plh propagation delay 400 1300 400 1300 400 1300 ps t phl i 0 ?i 15 to output t plh propagation delay 400 1800 400 1800 400 1800 ps t phl s 0 , s 1 to output t plh propagation delay 400 1600 400 1600 400 1600 ps t phl s 2 , s 3 to output t tlh transition time 300 900 300 900 300 900 ps t thl 20% to 80%, 80% to 20% ac electrical characteristics v ee = ?.2v to ?.5v unless otherwise specified; v cc = v cca = gnd timing diagram propagation delay and transition times output input 20% 80% 50% t phl t plh t tlh t thl 0.7 0.1 ns 0.7 0.1 ns 0.95v 1.69v 20% 80% 50% note: v ee = 4.2v to 5.5v unless otherwise specified; v cc = v cca = gnd
4 sy100s364 micrel, inc. m9999-042307 hbwhelp@micrel.com or (408) 955-1690 28-pin plcc (j28-1) rev. a micrel, inc. 2180 fortune drive san jose, ca 95131 usa tel + 1 (408) 944-0800 fax + 1 (408) 474-1000 web http://www.micrel.com the information furnished by micrel in this datasheet is believed to be accurate and reliable. however, no responsibility is as sumed by micrel for its use. micrel reserves the right to change circuitry and specifications at any time without notification to the customer. micrel products are not designed or authorized for use as components in life support appliances, devices or systems where malfu nction of a product can reasonably be expected to result in personal injury. life support devices or systems are devices or systems that (a) are intend ed for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant inj ury to the user. a purchaser s use or sale of micrel products for use in life support appliances, devices or systems is at purchaser s own risk and purchaser agrees to fully indemnify micrel for any damages resulting from such use or sale. ? 2006 micrel, incorporated.
|